This section covers installing Squirro on a supported Linux system, either Red Hat® Enterprise Linux® (RHEL) or its open source derivative CentOS Linux.
In addition to this installation method, Squirro also provides ready-made images for VMWare and VirtualBox, that are fully configured. See the Installation section for information on these methods.
A Squirro cluster can contain anywhere from just one to dozens of servers. Adding additional servers to a Squirro cluster always serves two different needs: performance and capacity. As these needs do not necessarily scale in the same way, Squirro differentiates two different types of servers:
Storage and cluster nodes can be installed on the same server, and for a single-node setup that is the recommended approach. But if you intend to scale to more than just one server, it is recommended to only install one of the two node types on a server. That makes better use of the available performance and allows for more flexible scaling.
This manual assumes that a few prerequisites have been met. This includes a set up system with internet connectivity and some relevant ports opened in the firewall.
If some of these conditions can not be met, please contact support.
The installation of the base system is not covered in this manual. A fully functional RHEL or CentOS installation is assumed to be set up. The supported versions of these Linux distributions are documented on the System Requirements page.
If you want to avoid setting up Linux yourself, there are pre-installed images available for VMWare and VirtualBox. See the Installation section for information on these methods.
The Linux system needs internet access to download the Squirro packages. Additionally the system should be accessible from your internal network, so that the Squirro interface can be accessed by administrators and users.
Information on how to set up networking is provided by Red Hat in their networking guide.
Incoming traffic to Squirro servers should be open on a number of TCP ports. The individual ports and the required access level are documented below:
TCP Port | Usage | Open for |
---|---|---|
9200 | Elasticsearch access | All storage and Squirro nodes |
9300 | Elasticsearch replication | All storage nodes |
TCP Port | Usage | Open for |
---|---|---|
81 | Web access |
|
111 | Gluster |
|
443 | Web access (SSL-protected) |
|
2181 | Zookeeper |
|
2888 | Zookeeper node discovery |
|
3306 | MySql |
|
3888 | Zookeeper node discovery |
|
6379 | Redis (storage) |
|
6380 | Redis (cache) |
|
24007 | Gluster |
|
49152+ (one per node, e.g. range 49152 – 49155 for a cluster of three nodes) | Gluster nodes |
|
Squirro provides packages that sets up all the Linux users required on a system. Those packages are used in the instructions below.
However in some environments users must not be created by packages. For these cases, users have to be manually created up-front. See the separate page Linux users for Squirro for a detailed list on users that need to be set up.
Squirro packages are provided with a Yum repository. Yum is a utility, provided with the RHEL / CentOS Linux system, that downloads and installs packages from central repositories. To configure a new such repository, it needs to be set up using a file in the folder /etc/yum.repos.d
.
Create the file /etc/yum.repos.d/squirro.repo
. The exact content of the file will be provided to you by Squirro support, when delivering the license.
The following is an example for RHEL 6.5, though the username and password for the YUM repository have not been filled in:
[squirro-stable] name=Squirro - Red Hat Enterprise Linux 6 - Stable baseurl=https://<user name>:<password>@mirror.squirro.net/rhel/6/stable/$basearch/latest/ enabled=1 gpgkey=https://mirror.squirro.net/rhel/RPM-GPG-KEY-squirro-stable gpgcheck=1 sslverify=1 metadata_expire=300 |
Squirro depends on Python, which is provided by a separate YUM repository. Execute the following commands to set up this repository. Please answer y for yes in response to the yum install command prompts.
RHEL | CentOS | ||
---|---|---|---|
|
|
Installation of the storage node happens with two separate packages. The first package installs the required Linux users and the second installs the services. Furthermore, we also need to explicitly install a few dependencies. Use the following commands for the installation:
yum install jre |
sudo su yum install squirro-storage-node-users yum install elasticsearch # in case of installing Squirro v2.6.0 yum install squirro-storage-node |
Installation of the Squirro cluster node happens with two separate packages. The first package installs the required Linux users and the second installs the services. Furthermore, we also need to explicitly install a few dependencies. Use the following commands for the installation:
Squirro depends on JRE which is provided in the Squirro YUm repository itself. But this package has to be installed explicitly as none of the Squirro packages declare an explicit dependency on JRE. This is done to provide more flexibility in making Squirro work for various custom deployments where we do not control the version of Java installed on the server. Please execute the yum command below to install JRE
yum install jre |
If installing from the Squirro repository, please follow the steps below:
yum install python27-python |
Squirro depends on Python, which is provided by a separate YUM repository. Execute the following commands to set up this repository. Please answer y for yes in response to the yum install command prompts.
RHEL6 | RHEL7 | Centos | |||
---|---|---|---|---|---|
|
|
|
RHEL6 / CentOS 6 | RHEL7 / CentOS 7 | ||
---|---|---|---|
|
|
You can choose to run MySql server and Redis servers remotely, i.e. not residing on the Squirro Cluster Node if you go through the trouble of setting up MySql and Redis Server installations with a specific configuration. To set up Squirro with remote MySql server and Redis server "Backends", please create a readable file /etc/squirro/backends.ini with the content:
|
Next install the following prerequisites:
RHEL6 / Centos 6 | RHEL7 / Centos 7 | |
---|---|---|
n/a | The default MySQL variant for MySQL on RHEL7/CentOS7 is MariaDB. Please execute the following before you proceed further:
Once we have released MariaDb RPM packages, the corresponding upgrade will undo this indirection. |
Installation of the Squirro cluster node happens with two separate packages. The first package installs the required Linux users and the second installs the services. Use the following commands for the installation:
yum install squirro-cluster-node-users yum install squirro-cluster-node |
If the Storage and Cluster node are not the same physical machine, then you need now to adjust the file /etc/nginx/conf.d/upstream-elastic.inc to point to the IP or Hostnames of the storage node(s).
Examples:
Single Server both roles | Dedicated Storage Node | Multiple Storage Nodes | |||
---|---|---|---|---|---|
|
|
|
If changes have been made to this file, reload the nginx configuration
service nginx reload |
If you have chosen to rely on remote MySql and/or Redis server installations, please follow the steps on Setup on Linux with Remote MySql and Redis Servers. |
Finally start the Squirro Services
RHEL6 / Centos 6 | RHEL7 / Centos 7 | |||
---|---|---|---|---|
|
|